Hyundai Kona: Engine Control System / Accelerator Position Sensor (APS) Specifications
| Specification |
|
Accelerator Position |
Output Voltage (V) |
|
|
APS1 |
APS2 |
|
|
C.T |
0.7 - 0.8 |
0.325 - 0.425 |
|
W.O.T |
3.98 - 4.22 |
1.93 - 2.17 |
Accelerator Position Sensor (APS) Description and operation
Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal module
and detects the rotation angle of the accelerator pedal. The APS is one of the
most imp ...
Accelerator Position Sensor (APS) Schematic diagrams
Circuit Diagram
Harness Connector
...
Other information:
Hyundai Kona (OS) 2018-2024 Service Manual: Purge Control Solenoid Valve (PCSV) Description and operation
Description
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls
the passage between the canister and the intake manifold. It is a solenoid valve
and is open when the ECM grounds the valve control line. When the passage is
open (PCSV ON), fuel vapo ...
Hyundai Kona (OS) 2018-2024 Service Manual: Front Wheel Speed Sensor Repair procedures
Removal
1.
Turn the ignition switch OFF and then disconnect the negative (-) battery
cable.
2.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
3.
Remove t ...
