Hyundai Kona: Brake System / Forward Collision-Avoidance Assist (FCA) System

Rear Wheel Speed Sensor Repair procedures

Removal [Tortion Beam Axle Type] 1. Turn the ignition switch OFF and then disconnect the negative (-) battery cable. 2. Loosen the ...

Description and operation

Description – FCA system is designed to help avoid a potential collision or reduce its impact when drivers applies inadequate, delayed or no brakes at all ...

Other information:

Hyundai Kona (OS) 2018-2024 Owners Manual: If the engine will not start
If the engine doesn't turn over or turns over slowly Be sure the shift lever is in N (Neutral) or P (Park) if it is dual clutch transmission vehicle. The engine starts only when the shift lever is in N (Neutral) or P (Park). Check the battery connections to be sure they are clean and tight. ...

Hyundai Kona (OS) 2018-2024 Service Manual: Blind-Spot Collision Warning Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BCW unit after loosening the mou ...