| Inspection |
| 1. |
Turn the ignition switch OFF and disconnect the battery negative (-)
cable.
|
| 2. |
Disconnect the fuel pressure regulator valve connector.
|
| 3. |
Measure resistance between the fuel pressure regulator valve terminals
1 and 2.
|
| 4. |
Check that the resistance is within the specification.
|
Fuel Pressure Control Valve (FPCV) Schematic diagramsHyundai Kona (OS) 2018-2026 Service Manual: Rear Door Latch Repair procedures
Replacement
1.
Remove the rear door outside handle.
(Refer to Rear Door - "Rear Door Outside Handle")
2.
Loosen the rear door latch mounting screws.
Tightening torque :
6.9 - 10.8 N ...
Hyundai Kona (OS) 2018-2026 Owners Manual: Rear view monitor
The Rear view monitor will activate when the engine is running and the shift
lever is in the R (Reverse) position.
This is a supplemental system that shows behind the vehicle through the mirror
or navigation display while backing-up.
WARNING
The Rear view monitor is not a safety device. It only s ...