Ford Fusion: Starting and Stopping the Engine / General Information. Keyless Starting

General Information

WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage.

WARNING: Do not park, idle or drive your vehicle on dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, creating the risk of fire.

WARNING: Do not start the engine in a closed garage or in other enclosed areas. Exhaust fumes can be toxic. Always open the garage door before you start the engine.

WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. If you smell exhaust fumes inside your vehicle, have your vehicle inspected immediately. Do not drive if you smell exhaust fumes.

If you disconnect the battery, your vehicle may exhibit some unusual driving characteristics for approximately 5 mi (8 km) after you reconnect it. This is because the engine management system must realign itself with the engine. You can disregard any unusual driving characteristics during this period.

The powertrain control system meets all Canadian interference-causing equipment standard requirements regulating the impulse electrical field or radio noise.

When you start the engine, avoid pressing the accelerator pedal before and during operation. Only use the accelerator pedal when you have difficulty starting the engine.

Keyless Starting

Note: The system may not function if the intelligent access key is close to metal objects or electronic devices, for example keys or a cell phone.

Note: A valid intelligent access key must be located inside your vehicle to switch the ignition on and start your vehicle.

Ignition Modes

Ford Fusion. General Information. Keyless Starting

The keyless starting system has three modes:

Off: Turns the ignition off.

On: All electrical circuits are operational and the warning lamps and indicators illuminate.

Start: Starts your vehicle. The engine may not start when your vehicle starts.

Starting and Stopping the Engine
...

Starting a Gasoline Engine
When you start the engine, the idle speed increases. This helps to warm up the engine. If the engine idle speed does not slow down automatically, have your vehicle checked by an authorized dealer. ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Seat Belt Buckle Switch (BS) Description and operation
Description • The SRSCM should detect the condition of seat belt buckles (BS) of the driver and passenger seats. • The SRSCM provides two pins to each side, in order to enter the condition of seat belt buckles (BS) of the d ...

Hyundai Kona (OS) 2018-2021 Service Manual: Description and operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. The lamp shall turn on for 6 seconds during the initialization ...

© 2018-2021 www.hkona.com