Hyundai Kona: Fuses And Relays / ICM (Integrated Circuit Module) Relay Box Repair procedures

Hyundai Kona (OS) 2018-2023 Service Manual / Body Electrical System / Fuses And Relays / ICM (Integrated Circuit Module) Relay Box Repair procedures

Inspection
Out Side Mirror Folding Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.9 and No.19 terminals when power and ground are connected to the No.10 and No.20 in the ICM-B.
Out Side Mirror Unfolding Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.8 and No.19 terminals when power and ground are connected to the No.10 and No.18 in the ICM-B.
ICM (Integrated Circuit Module) Relay Box Description and operation
Description The ICM is united with many kinds of relays and installed over the instrument panel box. ...

Head Up Display System
...

Other information:

Hyundai Kona (OS) 2018-2023 Service Manual: Rear Door Belt Inside Weatherstrip Repair procedures
Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Remove the rear door belt inside weatherstrip (A). 3. To install, reverse removal procedure. ...

Hyundai Kona (OS) 2018-2023 Owners Manual: Icy road warning light
This warning light is to warn the driver the road may be icy. When the temperature on the outside temperature gauge is approximately below 4°C (40°F), the Icy Road Warning Light and Outside Temperature Gauge blinks 10 times, and then illuminates. Also, the warning chime sounds 3 times. Informat ...

© 2018-2023 www.hkona.com