Hyundai Kona: Warning and indicator lights / Immobilizer Indicator Light (without smart key)
.png)
This indicator light illuminates:
- When the vehicle detects the immobilizer in the key with the ignition
switch in the ON position.
- At this time, you can start the engine.
- The indicator light goes off after starting the engine.
This indicator light blinks:
- When there is a malfunction with the immobilizer system.
In this case, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
AUTO STOP Indicator Light
This indicator light illuminates:
When the engine enters the Idle Stop mode of the ISG (Idle Stop and Go)
system.
This indicator light blinks:
When the automatic starting occurs, the AUTO STOP ...
Immobilizer Indicator Light (with smart key)
This indicator light illuminates for up to 30 seconds:
When the vehicle detects the smart key in the vehicle with the Engine
Start/Stop button in the ACC or ON position. - At this time, you can s ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: 4WD ECU Repair procedures
Replacement
1.
Prior to replacing the 4WD ECU, check the 4WD ECU's clutch learing with
the GDS tool.
(Refer to 4WD Control System - "Repair procedure")
2.
Turn ignition switch OFF and disconnect the negative (- ...
Hyundai Kona (OS) 2018-2026 Service Manual: CVVT Oil Control Valve (OCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV terminals 1 and 2.
4.
Check that the resistance is within the spec ...
