Ford Fusion: Doors and Locks / Keyless Entry

SECURICODE™ Keyless Entry Keypad

The keypad is near the driver window. It illuminates when touched.

Note: If you enter your entry code too fast on the keypad, the unlock function may not work. Enter your entry code again more slowly.

Ford Fusion. Keyless Entry

You can use the keypad to do the following:

You can operate the keypad with the factory-set five-digit entry code. The code is on the owner’s wallet card in the glove box and is available from an authorized dealer. You can also program up to five of your own five-digit personal entry codes.

Programming a Personal Entry Code

  1. Enter the factory-set five-digit code.
  2. Press 1·2 on the keypad within five seconds.
  3. Enter your personal five-digit code. You must press each number within five seconds of each other.
  4. Press 1·2 on the keypad to save personal code 1.

The doors lock then unlock to confirm that programming was successful.

To program additional personal entry codes, repeat steps 1 through 3, then for step 4:

You can also program a personal entry code using the touchscreen.

Hints:

Erasing a Personal Code

  1. Enter the factory-set five-digit code.
  2. Press and release 1·2 on the keypad within five seconds.
  3. Press 1·2 and hold for two seconds. You must do this within five seconds of completing step 2.

All personal codes erase and only the factory-set five-digit code works.

Anti-Scan Feature

The keypad goes into an anti-scan mode if you enter the wrong code seven times. This mode turns off the keypad for one minute and the keypad lamp flashes.

Anti-scan turns off after any of the following occur:

Locking and Unlocking the Doors

Locking All Doors

Press and hold 7·8 and 9·0 on the keypad simultaneously with the driver door closed. You do not need to enter a code first.

Unlocking Only the Driver Door

Enter the factory-set or your personal five-digit code. You must press each number within five seconds of each other. The interior lamps illuminate.

Note: All doors unlock if you switch on the all door unlocking mode.

Unlocking All Doors

Enter the factory-set code or your personal code, then press 3·4 on the keypad within five seconds.

Opening the Luggage Compartment

Enter the factory-set code or your personal code, then press 5·6 on the keypad within five seconds.

Displaying the Factory-Set Code

Note: You need to have two programmed keys for this procedure.

  1. Remove the key blade from the transmitter.

    Ford Fusion. Keyless Entry

  2. Remove the rubber covering (A) from the cup holder. With the buttons facing upward and the unlock button facing the front of your vehicle, place the first intelligent access key into the backup slot (B).
  3. Press the push button ignition switch once and wait a few seconds.
  4. Press the push button ignition switch again and remove the key.
  5. Insert the second programmed key into the backup slot, and then press the push button ignition switch.

The factory-set code appears in the information display for a few seconds.

Note: The code may not display until after any other warning messages first display.

Autounlock. Illuminated Entry. Illuminated Exit. Battery Saver
Autounlock Autounlock unlocks all the doors when all of the following occur: The ignition is on, all the doors are closed, and your vehicle has been moving at a speed greater than 12 mph (20 ...

Interior Luggage Compartment Release
WARNING: Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a child’s reach. Unsupervised children could lock themselves in the trunk and risk injury ...

Other information:

Ford Fusion 2013–2020 Owners Manual: All-Wheel Drive
All-wheel drive uses all four wheels to power the vehicle. This increases traction, enabling you to drive over terrain and road conditions that a conventional two-wheel drive vehicle cannot. The AWD system turns on when needed and does not require input from you. Note: The AWD feature gives yo ...

Ford Fusion 2013–2020 Owners Manual: Navigation
Note: For more information, refer to our website. Select the navigation option on the feature bar. Map view menu. Zoom out. Zoom in. Route guidance menu. Destination entry menu. Setting a Destination Destination Entry Menu Setting a Destination Using the Text Entry Screen Text entry ...

© 2018-2021 www.hkona.com