Hyundai Kona: Warning and indicator lights / Malfunction Indicator Lamp (MIL)
.png)
This warning light illuminates:
- When you set the ignition switch or the Engine Start/Stop button to the
ON position.
- It illuminates for approximately 3 seconds and then goes off. - When there is a malfunction with the emission control system.
In this case, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
NOTICE
Driving with the Malfunction Indicator Lamp (MIL) on may cause damage to the emission control system which could affect drivability and/or fuel economy.
NOTICE - Gasoline Engine
If the Malfunction Indicator Lamp (MIL) illuminates, potential catalytic converter damage is possible which could result in loss of engine power.
In this case, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
Electric Power Steering (EPS) Warning Light
This warning light illuminates:
When you set the ignition switch or the Engine Start/Stop button to the
ON position. - It illuminates for approximately 3 seconds and then goes off.
When there is ...
Charging System Warning Light
This warning light illuminates:
• When there is a malfunction with either the alternator or electrical charging
system.
If there is a malfunction with either the alternator or electrical charging ...
Other information:
Hyundai Kona (OS) 2018-2026 Owners Manual: Cruise Control operation
1. CRUISE () indicator
2. SET indicator
The Cruise Control system allows you to drive at speeds above 30 km/h (20 mph)
without depressing the accelerator pedal.
WARNING
Take the following precautions:
Always set the vehicle speed under the speed limit in your country.
If the Cruise Control is l ...
Hyundai Kona (OS) 2018-2026 Service Manual: Temperature Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector.
3.
Verify that the temperature control actuator operates to the cool
posit ...
