Ford Fusion: MyKey™ / Principle of Operation

MyKey allows you to program keys with restricted driving modes to promote good driving habits. You can program the restrictions to all keys except one. Any keys that you did not program are administrator keys or admin keys.

You can use admin keys to:

After you program a MyKey, you can view the following information through the information display:

Note: Every MyKey receives the same restrictions and settings. You cannot program them individually.

Note: For vehicles equipped with a push-button start switch: When both a MyKey and an admin key are present when you start your vehicle, the system recognizes the admin key only.

Standard Settings

Not every vehicle includes the features listed below. If your vehicle has this equipment, then you cannot change the following settings when using a MyKey:

Optional Settings

You can configure certain vehicle feature settings when you first create a MyKey. You can also change the settings afterward with an admin key.

Note: Not every feature applies to every vehicle in every market. When they are available for your vehicle, then they appear in your information display, providing choices to switch them on or off, or to select a more specific setting.

WARNING: Do not set MyKey maximum speed limit to a limit that will prevent the driver from maintaining a safe speed considering posted speed limits and prevailing road conditions. The driver is always responsible to drive in accordance with local laws and prevailing conditions. Failure to do so could result in accident or injury.

MyKey™
...

Creating a MyKey
Use the information display to create a MyKey. Switch the ignition on using the key or the transmitter you want to program. If your vehicle has a push-button start, place the transmitter into ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Components and components location
Component Location 1. Horn switch 2. Horn relay (Built - in PCB Block) 3. Horn 4. Clock spring ...

Hyundai Kona (OS) 2018-2021 Service Manual: Evaporator Core Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3. Remove the evaporato ...

© 2018-2021 www.hkona.com