Ford Fusion: Remote Control / Remote Start (If Equipped). Replacing a Lost Key or Remote Control

Ford Fusion 2013–2020 Owners Manual / Keys and Remote Controls / Remote Control / Remote Start (If Equipped). Replacing a Lost Key or Remote Control

Remote Start (If Equipped)

WARNING: To avoid exhaust fumes, do not use remote start if your vehicle is parked indoors or in areas that are not well ventilated.

Note: Do not use remote start if your fuel level is low.

Ford Fusion. Remote Start (If Equipped). Replacing a Lost Key or Remote Control The remote start button is on the remote control.

This feature allows you to start your vehicle from the outside. Your remote control has an extended operating range.

If your vehicle has automatic climate control, you can configure it to operate when you remote start your vehicle.. A manual climate control system will run at the setting it was set to when you switched your vehicle off.

Many states and provinces have restrictions for the use of remote start. Check your local and state or provincial laws for specific requirements regarding remote start systems.

The remote start system does not work when any of the following conditions occur:

Remote Control Feedback (If Equipped)

An LED on the remote control provides status feedback of remote start or stop commands.

Ford Fusion. Remote Start (If Equipped). Replacing a Lost Key or Remote Control

Remote Starting Your Vehicle

Note: You must press each button within three seconds of each other. Your vehicle will not remote start if you do not follow this sequence.

Ford Fusion. Remote Start (If Equipped). Replacing a Lost Key or Remote Control

To remote start your vehicle:

  1. Press the lock button to lock all the doors.
  2. Press the remote start button twice. The exterior lamps flash twice.

The horn sounds if the system fails to start.

Note: You must press the push button ignition switch on the instrument panel once while applying the brake pedal before driving your vehicle.

The power windows do not work during remote start and the radio does not turn on automatically.

The parking lamps remain on and your vehicle will run for 5, 10 or 15 minutes, depending on the setting.

Extending the Engine Running Time

To extend the engine running time duration of your vehicle during remote start, repeat steps 1 and 2 while the engine is running. If the duration is set to 15 minutes, the duration extends by another 15 minutes. For example, if your vehicle had been running from the first remote start for 10 minutes, your vehicle continues to run now for a total of 30 minutes. You can extend the engine running time duration to a maximum of 30 minutes.

Wait at least five seconds before remote starting after the engine stops running.

Turning Your Vehicle Off After Remote Starting

Ford Fusion. Remote Start (If Equipped). Replacing a Lost Key or Remote Control Press the button once. Your vehicle and the parking lamps turn off.

You may have to be closer to your vehicle than when starting due to ground reflection and the added noise of your running vehicle.

You can switch this feature on or off in the information display.

Memory Feature

You can program your remote control to recall memory positions.

Replacing a Lost Key or Remote Control

You can purchase replacement keys or remote controls from an authorized dealer. Authorized dealers can program remote controls for your vehicle.

Car Finder. Sounding the Panic Alarm
Car Finder Press the button twice within three seconds. The horn sounds and the direction indicators flash. We recommend you use this method to locate your vehicle, rather than using the panic a ...

MyKey™
...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Brake Line Repair procedures
Removal Brake Tube [VDC Control unit ↔ Master cylinder] 1. Turn ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the brake fluid level switch connector (A) 3. Remov ...

Hyundai Kona (OS) 2018-2021 Owners Manual: Drive mode integrated control system
The drive mode may be selected according to the driver's preference or road condition. The system resets to be in the COMFORT mode (except if it is in ECO mode), when the engine is restarted. Information If there is a problem with the instrument cluster, the drive mode will be in COMFORT mode and ...

© 2018-2021 www.hkona.com