Ford Fusion: Using Adaptive Cruise Control (IF EQUIPPED) / Switching Adaptive Cruise Control On. Setting the Adaptive Cruise Speed. Setting the Adaptive Cruise Speed When Your Vehicle is Stationary

Ford Fusion 2013–2020 Owners Manual / Cruise Control / Using Adaptive Cruise Control (IF EQUIPPED) / Switching Adaptive Cruise Control On. Setting the Adaptive Cruise Speed. Setting the Adaptive Cruise Speed When Your Vehicle is Stationary

Switching Adaptive Cruise Control On

Ford Fusion. Setting the Adaptive Cruise Speed When Your Vehicle is Stationary For vehicles without Speed Limiter, press and release the button.

Ford Fusion. Setting the Adaptive Cruise Speed When Your Vehicle is Stationary For vehicles with Speed Limiter, press and release the button.

The indicator, current gap setting and set speed appear in the information display.

Ford Fusion. Setting the Adaptive Cruise Speed When Your Vehicle is Stationary

Setting the Adaptive Cruise Speed

Drive to your preferred speed.

Ford Fusion. Setting the Adaptive Cruise Speed When Your Vehicle is Stationary Press and release the button.

Take your foot off the accelerator pedal.

The indicator, current gap setting and set speed appear in the information display.

Ford Fusion. Setting the Adaptive Cruise Speed When Your Vehicle is Stationary

A vehicle graphic illuminates if there is a vehicle detected in front of you.

Note: When adaptive cruise control is active, the speedometer may vary slightly from the set speed displayed in the information display.

Setting the Adaptive Cruise Speed When Your Vehicle is Stationary

Follow a vehicle to a complete stop.

Ford Fusion. Setting the Adaptive Cruise Speed When Your Vehicle is Stationary Press while keeping the brake pedal fully pressed.

The set speed adjusts to 20 mph (30 km/h).

The indicator, current gap setting and set speed appear in the information display.

Using Adaptive Cruise Control (IF EQUIPPED)
WARNING: Pay close attention to changing road conditions such as entering or leaving a highway, on roads with intersections or roundabouts, roads without visible lanes of travel, roads that are w ...

Following a Vehicle. Following a Vehicle to a Complete Stop
Following a Vehicle WARNING: When following a vehicle that is braking, your vehicle does not always decelerate quickly enough to avoid a crash without driver intervention. Apply the brakes when ne ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Front Wheel Transfer Assembly Repair procedures
Removal 1. Remove the following items. (Refer to Suspension System - "Sub Frame") 2. Remove the propeller shaft (A). Tightening torque : 49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.1 - 47. ...

Hyundai Kona (OS) 2018-2021 Service Manual: ESP OFF Switch Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad ganish assembly (LH). (Refer to Body - "Main Crash Pade Assembly") 3. Disconnect the ...

© 2018-2021 www.hkona.com