Ford Fusion: Wheels and Tires / Technical Specifications - 1.5L  EcoBoost™/2.0L EcoBoost™/2.5L

Ford Fusion 2013–2020 Owners Manual / Wheels and Tires / Technical Specifications - 1.5L  EcoBoost™/2.0L EcoBoost™/2.5L

Wheel Lug Nut Torque Specifications

WARNING: When you install a wheel, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure to secure any fasteners that attach the rotor to the hub so they do not interfere with the mounting surfaces of the wheel. Installing wheels without correct metal-to-metal contact at the wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off while your vehicle is in motion, resulting in loss of vehicle control, personal injury or death.

Ford Fusion. Technical Specifications - 1.5L  EcoBoost™/2.0L EcoBoost™/2.5L

*Torque specifications are for nut and bolt threads free of oil, dirt and rust. Use only Ford recommended replacement fasteners.

Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).

Ford Fusion. Technical Specifications - 1.5L  EcoBoost™/2.0L EcoBoost™/2.5L

  1. Wheel pilot bore.

Inspect the wheel pilot bore and mounting surface prior to installation. Remove any visible corrosion or loose particles.

Stowing the Flat Tire Using the Retainer Strap (If Equipped)
You can temporarily stow the full-size road wheel in the spare tire compartment. Find the flat tire retainer strap tucked inside the jack channel. Locate the jack bolt-down bracket. Push the ret ...

Technical Specifications - 2.7L EcoBoost™
Wheel Lug Nut Torque Specifications WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wh ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: A/C Pressure Transducer Repair procedures
Inspection 1. Measure the pressure of high pressure line by measuring voltage output between terminal "1" and "2". 2. Inspect the voltage value whether it is sufficient to be regular ...

Hyundai Kona (OS) 2018-2021 Service Manual: Components and components location
Component Location [Engine Room] 1. Engine room junction block [Interior Relay] 1. Smart junction block (SJB) 2. ICM relay block ...

© 2018-2021 www.hkona.com