Hyundai Kona: Tires and wheels / Tire care
For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle.
.png)
All specifications (sizes and pressures) can be found on a label attached to the driver’s side center pillar.
Tires and wheels
WARNING
Tire failure may cause loss of vehicle control resulting in an accident. To
reduce risk of SERIOUS INJURY or DEATH, take the following precautions:
Inspect your tires monthly for proper inf ...
Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are
cold. “Cold tires” means the vehicle has not been driven for at least three hours
or has been driven for less than 1 ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Dual Clutch Assembly Repair procedures
Removal
1.
Remove the dual clutch transmission from the vehicle.
(Refer to Dual Clutch System - "DCT")
2.
Remove the retaining ring (A) and then removing the spline hub (B).
3.
Remove ...
Hyundai Kona (OS) 2018-2026 Owners Manual: Distributing the sealant
9. Immediately drive approximately 7~10 km (4~6 miles or, about 10min) to evenly
distribute the sealant in the tire.
Do not exceed a speed of 80 km/h (50 mph). If possible, do not fall below a speed
of 20 km/h (12 mph). While driving, if you experience any unusual vibration, ride
disturbance or ...
