Ford Fusion: Unique Driving Characteristics (If Equipped)

Ford Fusion 2013–2020 Owners Manual / Unique Driving Characteristics (If Equipped)

The system helps reduce fuel consumption by automatically shutting off and restarting the engine while your vehicle is stopped. The engine will restart automatically when you release the brake pedal. In some situations, your vehicle may restart automatically, for example:

Note: Power assist steering is turned off when the engine is off.

WARNING: Apply the parking brake, shift into park (P), switch the ignition off and remove the key before you leave your vehicle. Failure to follow this instruction could result in personal injury or death.

WARNING: Apply the parking brake, shift into park (P), switch the ignition off and remove the key before you open the hood or have any service or repair work completed. If you do not switch the ignition off, the engine could restart at any time. Failure to follow this instruction could result in personal injury or death.

WARNING: The system may require the engine to automatically restart when the auto-start-stop indicator illuminates green or flashes amber. Failure to follow this instruction could result in personal injury. The Auto-Start-Stop system status is available at a glance within the information display.

Enabling Auto-Start-Stop

The system is automatically enabled every time you start your vehicle if the following conditions are met:

Ford Fusion. Unique Driving Characteristics (If Equipped) The green Auto-Start-Stop indicator light on the instrument cluster will illuminate to indicate when the automatic engine stop occurs.

Ford Fusion. Unique Driving Characteristics (If Equipped) If the instrument cluster is equipped with a grey Auto-Start-Stop indicator light, it is illuminated when automatic engine stop is not available due to one of the above noted conditions not being met.

Automatic Engine Restart

Any of the following conditions will result in an automatic restart of the engine:

Disabling Auto-Start-Stop

Ford Fusion. Unique Driving Characteristics (If Equipped) Press the Auto-Start-Stop button located on the center console to switch the system off. The button will illuminate. The system will only be deactivated for the current ignition cycle. Press the button again to restore Auto-Start-Stop function.

If your vehicle is in an Auto-Start-Stop state and you shift the transmission to reverse without pressing the brake, a message telling you to press the brake appears. You must press the brake pedal within 60 seconds, or you will need to shift to park and manually restart your vehicle.

Note: If the Shift to P, Restart Engine message appears and the amber Auto-Start-Stop indicator light is flashing, automatic restart is not available. The vehicle must be restarted manually.

Engine Block Heater (IF EQUIPPED)
WARNING: Failure to follow engine block heater instructions could result in property damage or serious personal injury. WARNING: Do not use your heater with ungrounded electrical systems or two-p ...

Fuel and Refueling
...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: SRS Control Module (SRSCM) Components and components location
Components 1. Supplemental Restraint System Control Module (SRSCM) Supplemental Restraint System Control Module (SRSCM) No Connector A Connector B 1 IGN 1 Pass ...

Hyundai Kona (OS) 2018-2021 Service Manual: Front Door Outside Handle Repair procedures
Replacement 1. Remove the plug hole (B). 2. After loosening the mounting bolt, remove the front door outside handle cover (A). Tightening torque : 7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-f ...

© 2018-2021 www.hkona.com