Ford Fusion: Active Park Assist (IF EQUIPPED) / Using Active Park Assist

Selecting an Active Park Assist Mode

Ford Fusion. Using Active Park Assist Press the button once to activate parallel parking. Press the button a second time to activate perpendicular parking. If you press the button again the system switches off.

If your vehicle is parked and after you switch the ignition on, you can use the information display to toggle through the modes. Press the button to switch the system on and open the system menu in the information display.

Note: If your vehicle is parked, the default mode is parallel park out assist. However, if you did not use active park assist to parallel park your vehicle, use the information display to select park out assist.

Note: You can repeatedly press the active park assist button to toggle through the modes only after moving your vehicle approximately 33 ft (10 m).

To toggle through the modes, use the buttons on the information display to select the following:

Note: There is no time limit for toggling through the modes.

Active Park Assist (IF EQUIPPED)
WARNING: You must remain in your vehicle when the system turns on. At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required. Failure to ...

Parallel Parking
The system detects available parallel parking spaces and steers your vehicle into the space. You control the accelerator, gearshift and brakes. The system visually and audibly guides you into a pa ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Sunroof Assembly Components and components location
Components Location 1. Sunroof assembly ...

Hyundai Kona (OS) 2018-2021 Service Manual: CVVT & Camshaft Repair procedures
Removal 1. Remove the cylinder head cover. (Refer to Cylinder Head Assembly - "Cylinder Head Cover") 2. Turn the crankshaft damper pulley so that No. 1 piston is at top dead center. (1) ...

© 2018-2021 www.hkona.com