Ford Fusion: Remote Control / Using the Key Blade

The key cylinder is under a cap on the driver door handle.

To remove the cap:

Ford Fusion. Using the Key Blade

  1. Insert the key blade into the slot on the bottom of the handle and apply upward pressure.
  2. While maintaining upward pressure, move the cap rearward to release it. Gently remove the key while doing so.

To install the cap:

Ford Fusion. Using the Key Blade

  1. Place the cap just forward of the key cylinder.
  2. Applying pressure to the cap, move it forward until it is in place. You may hear a snap as it engages.

Make sure you have properly installed the cap by trying to move it rearward.

Intelligent Access Key
Note: You may not be able to shift out of park (P) unless the intelligent access key is inside your vehicle. Your remote control operates the power locks and the remote start system. The key must ...

Replacing the Battery
Note: Refer to local regulations when disposing of your remote control batteries. Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board. Note: Replac ...

Other information:

Ford Fusion 2013–2020 Owners Manual: Safety Canopy™
WARNING: Do not place objects or mount equipment on or near the headliner at the siderail that may come into contact with a deploying curtain airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash. WARNING: Do not lean your head on the do ...

Hyundai Kona (OS) 2018-2021 Service Manual: Cluster Ionizer Description and operation
Description The cluster ionizer makes disinfection and decomposition of bad smell from the air-conditioner or inflow air. And it cleans the inside air of a vehicle. When the ignition switch is ON, the ionizer runs "CLEAN" mode and then "ION" mo ...

© 2018-2021 www.hkona.com