Ford Fusion: Automatic High Beam Control / What Is Automatic High Beam Control. Switching Automatic High Beam Control On and Off

Ford Fusion 2013–2020 Owners Manual / Automatic High Beam Control / What Is Automatic High Beam Control. Switching Automatic High Beam Control On and Off

What Is Automatic High Beam Control

The system turns on high beams if it is dark enough and no other traffic is present. If it detects an approaching vehicle’s headlamps or tail lamps, or street lighting ahead, the system turns the high beams off. Low beams remain on.

A camera sensor, centrally mounted behind the windshield of your vehicle, continuously monitors conditions to turn the high beams on and off.

Switching Automatic High Beam Control On and Off

Switch the system on or off using the information display.

Activating the Automatic High Beam Control

Ford Fusion. On and Off Switch the lighting control to the autolamps position to activate.

Note: Automatic high beams are not available when autolamps are not turned on.

When active, the high beams turn on if:

When active, the high beams turn off if:

Note: The deactivation speed is lower on curves.

Note: High beam reactivation may be delayed in certain curvy road situations.

Note: The system may not operate properly if the sensor is blocked. Keep the windshield free from obstruction or damage.

Note: The system may not operate properly in cold or inclement conditions. You can switch on the high beams by overriding the system.

Note: If the system detects a blockage, for example bird droppings, bug splatter, snow or ice, the system goes into low beam mode until you clear the blockage. A message may appear in the information display if the camera is blocked.

Note: Using much larger tires or equipping vehicle accessories such as snowplows can modify your vehicle's ride height and degrade automatic high beam control performance.

Automatic High Beam Control
...

Automatic High Beam Control Indicators. Overriding Automatic High Beam Control
Automatic High Beam Control Indicators The indicator illuminates to confirm when the system is ready to assist. Overriding Automatic High Beam Control WARNING: The system does not relieve you of y ...

Other information:

Ford Fusion 2013–2020 Owners Manual: Creating a MyKey
Use the information display to create a MyKey. Switch the ignition on using the key or the transmitter you want to program. If your vehicle has a push-button start, place the transmitter into the backup slot. Access the main menu in the information display and then scroll through the ...

Hyundai Kona (OS) 2018-2021 Owners Manual: Parking brake
Always set the parking brake before leaving the vehicle, to apply: Firmly depress the brake pedal. Pull up the parking brake lever as far as possible. WARNING To reduce the risk of SERIOUS INJURY or DEATH, do not operate the parking brake while the vehicle is moving except in an emergency situatio ...

© 2018-2021 www.hkona.com