Hyundai Kona: Trip modes / Accumulated Info display

This display shows the accumulated trip distance (1), the average fuel economy (2), and the total driving time (3).

The information is accumulated starting from the last reset.

To manually reset the information, press and hold the OK button when viewing the Accumulated driving info. The trip distance, the average fuel economy, and total driving time will reset simultaneously.

The accumulated driving information will continue to be counted while the engine is still running (for example, when the vehicle is in traffic or stopped at a stop light).

Information

The vehicle must be driven for a minimum of 300 meters (0.19 miles) since the last ignition key cycle before the average fuel economy will be recalculated.

Fuel economy
Average Fuel Economy (1) The average fuel economy is calculated by the total driving distance and fuel consumption since the last average fuel economy reset. The average fuel economy can be rese ...

Drive Info display
This display shows the trip distance (1), the average fuel economy (2), and the total driving time (3). The information is combined for each ignition cycle. However, when the engine has been OFF fo ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Special service tools
Special Service Tools Tool (Number and Name) Illustration Use 09581-2T100 Piston expander Spreading the front disc brake piston. 09964-C1100 FCA reflector ...

Hyundai Kona (OS) 2018-2020 Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the sp ...

© 2018-2020 www.hkona.com