Hyundai Kona: Trip modes / Drive Info display

This display shows the trip distance (1), the average fuel economy (2), and the total driving time (3).

The information is combined for each ignition cycle. However, when the engine has been OFF for 4 hours or longer the Drive Info screen will reset.

To manually reset the information, press and hold the OK button when viewing the Drive Info. The trip distance, the average fuel economy, and total driving time will reset simultaneously.

The driving information will continue to be counted while the engine is still running (for example, when the vehicle is in traffic or stopped at a stop light.)

Information

The vehicle must be driven for a minimum of 300 meters (0.19 miles) since the last ignition key cycle before the average fuel economy will be recalculated.

Accumulated Info display
This display shows the accumulated trip distance (1), the average fuel economy (2), and the total driving time (3). The information is accumulated starting from the last reset. To manually reset the ...

Digital Speedometer
This message shows the speed of the vehicle (km/h, MPH). ...

Other information:

Hyundai Kona (OS) 2018-2019 Owners Manual: FCA sensor
In order for the FCA system to operate properly, always make sure the sensor cover or sensor is clean and free of dirt, snow, and debris. Dirt, snow, or foreign substances on the lens may adversely affect the sensing performance of the sensor. NOTICE Do not apply license plate molding or foreig ...

Hyundai Kona (OS) 2018-2019 Service Manual: Rear Hub - Carrier Components and components location
Components 1. Brake disc 2. Hub bearing 3. Dust cover 4. Rear carrier assembly ...

© 2018-2019 www.hkona.com