Hyundai Kona: Heater / Temperature Control Actuator Components and components location

Hyundai Kona (OS) 2018-2020 Service Manual / Heating, Ventilation and Air Conditioning / Heater / Temperature Control Actuator Components and components location

Components Location

1. Temperature control actuator


Evaporator Core Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer ...

Temperature Control Actuator Description and operation
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit ...

Other information:

Hyundai Kona (OS) 2018-2020 Owners Manual: Prerequisites to reactivate the battery sensor
Keep the engine in the OFF status for 4 hours, and attempt to restart the engine 3 to 4 times for the batterysensor reactivation. Pay extreme caution not to connect any accessories (i.e. navigation and black box) to the vehicle with the engine in the OFF status. If not, the battery sensor may not ...

Hyundai Kona (OS) 2018-2020 Owners Manual: Washer fluid
Checking the washer fluid level Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing. WARNING To prevent serious in ...

© 2018-2020 www.hkona.com