Hyundai Kona: Heater / Temperature Control Actuator Description and operation

The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.

The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temperature door.

Temperature Control Actuator Components and components location

Components Location 1. Temperature control actuator ...

Temperature Control Actuator Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Instrument Cluster Components and components location
Components [Mono type (3.5")] [Super vision type (4.2")] [Seg type (3.5")] Connector Pin Information No Description No Description ...

Hyundai Kona (OS) 2018-2026 Service Manual: Filler-Neck Assembly Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Open the fuel filler door. 3. Remove the filler-neck mounting bolt (A). 4. Lift the ve ...