Hyundai Kona: Heating, Ventilation and Air Conditioning / Heater
- Heater Unit Components and components location
- Heater Unit Repair procedures
- Heater Core Repair procedures
- PTC Heater Description and operation
- PTC Heater Repair procedures
- Evaporator Core Repair procedures
- Temperature Control Actuator Components and components location
- Temperature Control Actuator Description and operation
- Temperature Control Actuator Repair procedures
- Mode Control Actuator Components and components location
- Mode Control Actuator Description and operation
- Mode Control Actuator Repair procedures
- Auto Defoging Actuator Components and components location
- Auto Defoging Actuator Description and operation
- Auto Defoging Actuator Repair procedures
Cluster Ionizer Repair procedures
Inspection
1.
Press the MODE switch more then 4 times within 2 seconds while pressing
the OFF switch.
Display
...
Heater Unit Components and components location
Component Location
1. Heater unit assembly
Compoents
1. Mode control actuator
2. PTC Heat ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Blind-Spot Collision Warning Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper.
(Refer to Body - "Rear Bumper")
3.
Remove the BCW unit after loosening the mou ...
Hyundai Kona (OS) 2018-2026 Service Manual: Purge Control Solenoid Valve (PCSV) Description and operation
Description
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls
the passage between the canister and the intake manifold. It is a solenoid valve
and is open when the ECM grounds the valve control line. When the passage is
open (PCSV ON), fuel vapo ...
