Hyundai Kona: Heater / Mode Control Actuator Components and components location

Hyundai Kona (OS) 2018-2020 Service Manual / Heating, Ventilation and Air Conditioning / Heater / Mode Control Actuator Components and components location

Components Location

1. Mode control actuator

Temperature Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. ...

Mode Control Actuator Description and operation
Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Blower Resistor (Manual) Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) ...

Hyundai Kona (OS) 2018-2020 Service Manual: Alternator Components and components location
Components 1. OAP (Overrunning Alternator Pulley) 2. Front bracket 3. Front bearing 4. Stator 5. Rotor 6. Rear Bearing 7. Rear Bracket 8. Brush Holder Assembly 9. Through Bolt 10. Rectifier Assembly 11. Rear Cover ...

© 2018-2020 www.hkona.com