Hyundai Kona: Heater / Mode Control Actuator Description and operation

Description
The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Mode Control Actuator Components and components location
Components Location 1. Mode control actuator ...

Mode Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Curtain Airbag (CAB) Module Description and operation
Description Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain airbag by using side impact sensor (SIS) signal.  &nb ...

Hyundai Kona (OS) 2018-2020 Service Manual: Front Oil Seal Repair procedures
Removal and Installation 1. Crankshaft damper pulley. (Refer to Timing System - "Damper Pulley") 2. Remove the front oil seal (A). 3. Install the front oil seal. ...

© 2018-2020 www.hkona.com