Hyundai Kona: Heater / Auto Defoging Actuator Components and components location

Hyundai Kona (OS) 2018-2020 Service Manual / Heating, Ventilation and Air Conditioning / Heater / Auto Defoging Actuator Components and components location

Components Location

1. Auto logging actuator


Mode Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. ...

Auto Defoging Actuator Description and operation
Description The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air co ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: DC/DC Converter Repair procedures
Removal [200W] 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Disc ...

Hyundai Kona (OS) 2018-2020 Service Manual: BJ Boot Components and components location
Components (1) [Gamma 1.6 T-GDI, Nu 2.0 MPI] 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 11. Snap ring 12. TJ case ...

© 2018-2020 www.hkona.com