Hyundai Kona: Sliding the sunroof / Automatic reverse

If the sunroof senses any obstacle while it is closing automatically, it will reverse direction then stop to allow the object to be cleared.

The auto reverse function does not work if a small obstacle is between the sliding glass and the sunroof sash.

You should always check that all passengers and objects are away from the sunroof before closing it.

WARNING

Small objects that can get caught between the sunroof glass and the front glass channel may not be detected by the automatic reverse system. In this case, the sunroof glass will not detect the object and will not reverse direction.

Sliding the sunroof
Pressing the sunroof control lever backward or forward momentarily to the second detent position completely opens or closes the sunroof even when the switch is released. To stop the sunroof at the d ...

Tilting the sunroof
Tilt the sunroof open: Push the sunroof control lever upward until the sunroof moves to the desired position. To close the sunroof: Press the sunroof lever forward until the sunroof moves to the des ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specification : Refer t ...

Hyundai Kona (OS) 2018-2024 Service Manual: Starter Specifications
Specification [NON-ISG] Item Specification Rated voltage 12V, 0.9 Kw The number of pinion teeth 10 Performance [No-load, 11.5V] Ampere Max. 60A ...

© 2018-2024 www.hkona.com