Hyundai Kona: Blind-spot collision warning (BCW) system / BCW

Blind-spot collision warning (BCW) system
[A] : Blind spot area [B] : Closing at high speed The Blind-spot Collision Warning (BCW) system uses radar sensors in the rear bumper to monitor and warn the driver of an approaching vehicle in the ...

Operating conditions
To operate: Press the BCW switch with the Ignition switch in the ON position. The indicator on the BCW switch will illuminate. When the vehicle speed exceeds 30 km/h (20 mph), the system will be act ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Rear torsion beam axle Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from front hub. Tightening torque : 107.9 - 127.5 N ...

Hyundai Kona (OS) 2018-2020 Service Manual: Heated Oxygen Sensor (HO2S) Description and operation
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance with the air/fuel ratio. The sensor must be hot in order to operate no ...

© 2018-2020 www.hkona.com