Hyundai Kona: Maintenance / Climate control air filter

Filter inspection

If the vehicle is operated in the severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier. When you, the owner, replace the climate control air filter, replace it performing the following procedure, and be careful to avoid damaging other components. Replace the filter according to the Maintenance Schedule.

Filter replacement

1. With the glove box open, remove the stoppers on both sides.

2. Remove the support strap (1).

3. Remove the climate control air filter case while pressing the lock on the right side of the cover.

4. Replace the climate control air filter.

5. Reassemble in the reverse order of disassembly.

NOTICE

Install a new climate control air filter in the correct direction with the arrow symbol( ) facing downwards, otherwise, it may be noisy and the effectiveness of the filter may be reduced.

Air cleaner
Filter replacement The air cleaner filter can be cleaned for inspection using compressed air. Do not attempt to wash or to rinse it, as water will damage the filter. If soiled, the air cleaner filter ...

Wiper blades
...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Front Stabilizer Bar Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from the front hub. Tightening torque : 107.9 - 12 ...

Hyundai Kona (OS) 2018-2021 Service Manual: Blind-Spot Collision Warning Switch Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad garnish assembly (LH). (Refer to Body - "Main Crash Pad Assembly") 3. Disconne ...

© 2018-2021 www.hkona.com