Hyundai Kona: Inside rearview mirror / Electric Chromic Mirror (ECM)

The electric rearview mirror automatically controls the glare from the headlamp of the vehicle behind you in nighttime or low light driving conditions.

When the engine is running, the glare is automatically controlled by the sensor mounted in the rearview mirror. The sensor detects the light level around the vehicle, and automatically adjusts to control the headlamp glare from vehicles behind you.

Whenever the shift lever is placed in R (Reverse), the mirror will automatically go to the brightest setting in order to improve the driver’s view behind the vehicle.

[A] : Indicator

The electric rearview mirror automatically controls the glare from the headlamp of the car behind you in nighttime or low light driving conditions. When the engine is running, the glare is automatically controlled by the sensor mounted in the rearview mirror. The sensor detects the light level around the vehicle, and automatically adjusts to control the headlamp glare from vehicles behind you. Whenever the shift lever is placed in R (Reverse), the mirror will automatically go to the brightest setting in order to improve the drivers view behind the vehicle.

NOTICE

When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing.

Day/night rearview mirror
[A] : Day/night lever, [B] : Day, [C] : Night Make this adjustment before you start driving and while the day/night lever is in the day position. Pull the day/night lever towards you to reduce glare ...

Outside rearview mirror
Be sure to adjust mirror angles before driving. Your vehicle is equipped with both left-hand and right-hand outside rearview mirrors. The mirror can be adjusted remotely with the remote switch. The ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: Description and operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. The lamp shall turn on for 6 seconds during the initialization ...

Hyundai Kona (OS) 2018-2024 Service Manual: Components and components location
Components Location 1. Rear shock absorber 2. Coil spring 3. Torsion beam axle 4. Torsion beam axle stay ...

© 2018-2024 www.hkona.com