Hyundai Kona: Engine Control System / Exhaust Gas Temperature Sensor (EGTS) Description and operation

Installed in exhaust manifold, the Exhaust Gas Temperature Sensor (EGTS) #1 for WGT senses the temperature of exhaust gas flowing into the WGT.

Installed in Gasoline Particulate Filter (GPF) assembly, the Exhaust Gas Temperature Sensor (EGTS) #2 for GPF senses the temperature of exhaust gas flowing into the GPF.

When predetermined engine condition is met, ECM burns soot collected in GPF with exhaust gas. During this, the exhaust gas temperature is an important factor of engine condition.

Heated Oxygen Sensor (HO2S) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between th ...

Exhaust Gas Temperature Sensor (EGTS) Specifications

Specification Exhaust Gas Temperature Sensor (EGTS) #1, 2 ▷ Type : Thermistor type Temperature [°C (°F)] Resistance (kΩ) -40 (- ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: SRS Control Module (SRSCM) Description and operation
Description • Supplemental Restraint System Control Module (SRSCM) determines whether and when to deploy air bag module, seat belt pretensioner (BPT) and emergency fastenig device (EFD). • It supplies the air bag module wit ...

Hyundai Kona (OS) 2018-2026 Service Manual: PTC Heater Repair procedures
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2 ...