Hyundai Kona: Engine Control System / Heated Oxygen Sensor (HO2S) Specifications
Hyundai Kona (OS) 2018-2026 Service Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S) Specifications
| Specification |
HO2S [Bank 1/Sensor 1] (Linear type)
|
Item |
Specification |
|
Heater Resistance (Ω) |
2.4 - 4.0 [20°C (68°F)] |
HO2S [Bank 1/Sensor 2] (Binary type)
|
A/F Ratio (λ) |
Output Voltage (V) |
|
RICH |
0.6 - 1.0 |
|
LEAN |
0 - 0.4 |
|
Item |
Specification |
|
Heater Resistance (Ω) |
Approx. 9.0 [20°C (68°F)] |
Heated Oxygen Sensor (HO2S) Description and operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output vol ...
Heated Oxygen Sensor (HO2S) Schematic diagrams
Circuit Diagram
Harness Connector
HO2S [Bank 1/ Sensor 1]
HO2S [Bank 1/ Sensor 2]
...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Injector Specifications
Specification
Item
Specification
Coil Resistance (Ω)
1.5 ± 0.075 [20°C (68°F)]
...
Hyundai Kona (OS) 2018-2026 Service Manual: Rear Seat Latch Repair procedures
Replacement
[LH]
•
When prying with a flat-tip screwdriver or use a prying trim
tool, wrap it with protective tape, and apply protective tape
around the relat ...
© 2018-2026 www.hkona.com
