Hyundai Kona: 4WD operation / Four Wheel Drive (4WD) mode selection
.png)
WARNING
If 4WD warning light (.png)
) stays on
the instrument cluster, your vehicle may have a malfunction with the 4WD system.
When the 4WD warning light (.png)
) illuminates
we recommend that the vehicle be checked by an authorized HYUNDAI dealer as soon
as possible.
CAUTION
When driving on normal roads, deactivate the 4WD LOCK mode by pushing the 4WD LOCK button (4WD LOCK indicator light goes off). Driving on normal roads with the 4WD LOCK mode, especially, when cornering may cause mechanical noise or vibration. The noise and vibration will disappear when the 4WD LOCK mode is deactivated. Prolong driving with the noise and vibration may damage some parts of the power train.
NOTICE
When the 4WD LOCK mode is deactivated, a sensation may be felt as the driving power is delivered entirely to the front wheels.
4WD operation
...
For safe 4WD operation
Before driving
Make sure all passengers are wearing seat belts.
Sit upright and closer to the steering wheel than usual. Adjust the steering
wheel to a position comfortable for you to drive.
Dri ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Rear Center Seat Belt Retractor Repair procedures
Replacement
•
When installing the belt, make sure not to damage the retractor.
1.
Remove the luggage side trim.
(Refer to Interior Tr ...
Hyundai Kona (OS) 2018-2026 Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the sp ...
