Hyundai Kona: Engine Control System / Fuel Pressure Control Valve (FPCV) Description and operation

Fuel Pressure Control Valve (FPCV) is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition.

RCV Control Solenoid Valve Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the RCV connector. 3. Measure resistance between the ...

Fuel Pressure Control Valve (FPCV) Specifications

Specification Item Specification Coil Resistance (Ω) 0.5 [20°C (68°F) ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Specifications
Specifications Items Specification Rated voltage DC 12V Operating voltage 9V - 16V Operating speed 30㎞/h - 255㎞/h ...

Hyundai Kona (OS) 2018-2026 Service Manual: Front Seat Belt Pretensioner Repair procedures
Replacement    • When installing the belt, make sure not to damage the pretensioner. 1. Remove the center pillar upper trim. (Refer to I ...