Hyundai Kona: ISG (Idle Stop & Go) System / ISG OFF Switch Description and operation
| Description |
DC/DC Converter Repair procedures
Removal
[200W]
1.
Turn the ignition switch OFF and disconnect the battery negative (-)
terminal.
2.
Remove the crash pad lower pan ...
ISG OFF Switch Repair procedures
Inspection
1.
Remove the ISG OFF switch.
Check for continuity between the terminals in each switch position according
to the table. If the continuity condi ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Purge Control Solenoid Valve (PCSV) Description and operation
Description
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls
the passage between the canister and the intake manifold. It is a solenoid valve
and is open when the ECM grounds the valve control line. When the passage is
open (PCSV ON), fuel vapo ...
Hyundai Kona (OS) 2018-2026 Service Manual: Compressor oil Repair procedures
Oil Specification
1.
The HFC-134a system requires synthetic (PAG) compressor oil whereas
the R-12 system requires mineral compressor oil. The two oils must
never be mixed.
2.
Compressor (PAG) oil varies accor ...
