Hyundai Kona: Dual clutch transmission / Parking
Always come to a complete stop and continue to depress the brake pedal. Move the shift lever into the P (Park) position, apply the parking brake, and place the ignition switch in the LOCK/OFF position. Take the Key with you when exiting the vehicle.
WARNING
When you stay in the vehicle with the engine running, be careful not to depress the accelerator pedal for a long period of time. The engine or exhaust system may overheat and start a fire.
The exhaust gas and the exhaust system are very hot. Keep away from the exhaust system components.
Do not stop or park over flammable materials, such as dry grass, paper or leaves. They may ignite and cause a fire.
Ignition key interlock system
The ignition key cannot be removed unless the shift lever is in the P (Park)
position. ...
Good driving practices
Never move the shift lever from P (Park) or N (Neutral) to any other position
with the accelerator pedal depressed.
Never move the shift lever into P (Park) when the vehicle is in motion.
Be su ...
Other information:
Hyundai Kona (OS) 2018-2021 Service Manual: Components and components location
Components
The following is the configuration of the FCA system.
–
Detection device (radar and camera) that can recognize potential obstacles
in the front.
–
Human-Machine Interface (HMI) to warn driver or change settings.
...
Hyundai Kona (OS) 2018-2021 Service Manual: Front Seat Belt Pretensioner Repair procedures
Replacement
•
When installing the belt, make sure not to damage the pretensioner.
1.
Remove the center pillar upper trim.
(Refer to I ...