Hyundai Kona: ISG (Idle Stop & Go) System / Battery Sensor Specifications

Specifications
Item
Specification
Rated Voltage (V)
12 - 14
Quiescent Current (uA)
Max. 175
Pin
2 (B+, LIN)

Battery Sensor Description and operation
Description Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a ...

Battery Sensor Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. Battery negative (-) terminal tightening nut : ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: Evaporator Core Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3. Remove the evaporato ...

Hyundai Kona (OS) 2018-2024 Owners Manual: If the engine will not start
If the engine doesn't turn over or turns over slowly Be sure the shift lever is in N (Neutral) or P (Park) if it is dual clutch transmission vehicle. The engine starts only when the shift lever is in N (Neutral) or P (Park). Check the battery connections to be sure they are clean and tight. ...

© 2018-2024 www.hkona.com