Hyundai Kona: Driver assist system / Parking Distance Warning (Reverse) system

[A] : Sensor

The Parking Distance Warning (Reverse) system assists the driver during reverse movement of the vehicle by chiming if any object is sensed within the distance of 120 cm (50 inches) behind the vehicle.

This system is a supplemental system that senses objects within the range and location of the sensors, it cannot detect objects in other areas where sensors are not installed.

WARNING

Rear view monitor
The Rear view monitor will activate when the engine is running and the shift lever is in the R (Reverse) position. This is a supplemental system that shows behind the vehicle through the mirror or ...

Operation of the Parking Distance Warning (Reverse) system
Operating condition This system will activate when backing up with the ignition switch in the ON position. However, if vehicle speed exceeds 5 km/h (3 mph), the system may not detect objects. I ...

Other information:

Hyundai Kona (OS) 2018-2023 Service Manual: Input shaft speed sensor 2 Repair procedures
Removal 1. Remove the cleaner assembly and air duct. (Refer to Engine Mechainical System - "Air Cleaner") 2. Disconnect the Input shaft speed sensor connector (A). 3. Remove the battery and ba ...

Hyundai Kona (OS) 2018-2023 Service Manual: Blind-Spot Collision Warning Switch Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad garnish assembly (LH). (Refer to Body - "Main Crash Pad Assembly") 3. Disconne ...

© 2018-2023 www.hkona.com