Hyundai Kona: Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Repair procedures

Hyundai Kona (OS) 2018-2026 Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Repair procedures

Removal

1.	Disconnect the PCV hose (A).

2.	Remove the PCV valve (B).

Inspection

Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves.

•	If the plunger does not move (PCV valve is clogged), clean or replace the valve.

Installation

Install in the reverse order of removal.

PCV Valve installation :

7.8 - 11.8 N.m (0.8 - 1.2 kgf.m. 5.8 - 8.7 lb-ft)

Positive Crankcase Ventilation (PCV) Valve Description and operation

Operation Principle ...

Evaporative Emission Control System

...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Schematic diagrams
Operation Condition for the ISG function Operation Condition for the ISG function After every engine start, the function is automatically active and on stand-by. The ISG OFF switch can be used to deactivate the function manually until the next terminal change. Pressing ...

Hyundai Kona (OS) 2018-2026 Owners Manual: Auto stop
To stop the engine in idle stop mode Manual transmission vehicle 1. Decrease the vehicle speed to 5 km/h (3 mph). 2. Set the gear in N (Neutral). 3. Release the clutch pedal. The auto stop indicator () illuminates in green on the instrument cluster, when the engine stops. Information The driving s ...