Hyundai Kona: Gauges and meters / Tachometer

The tachometer indicates the approximate number of engine revolutions per minute (rpm).

Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.

NOTICE

Do not operate the engine within the tachometer's RED ZONE. This may cause severe engine damage.

Speedometer
The speedometer indicates the speed of the vehicle and is calibrated in kilometers per hour (km/h) and/or miles per hour (MPH). ...

Engine coolant temperature gauge
This gauge indicates the temperature of the engine coolant when the ignition switch is in the ON position. NOTICE If the gauge pointer moves beyond the normal range area toward the “130 or H” p ...

Other information:

Hyundai Kona (OS) 2018-2019 Service Manual: Repair procedures
Adjustment Glass Adjustment    • Check the glass run channel for damage or deterioration, and replace them if necessary. 1. Remove t ...

Hyundai Kona (OS) 2018-2019 Service Manual: RCV Control Solenoid Valve Description and operation
Description RCV (Recirculation Valve) Control Solenoid Valve is installed on the cooling pan motor top and operates the RCV actuator which controls the by-pass passage of the turbo-charger compressor. When the throttle valve is closed during engine running [Tip-out], crash ...

© 2018-2019 www.hkona.com