Hyundai Kona: Maintenance / Washer fluid

Checking the washer fluid level

Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing.

WARNING

To prevent serious injury or death, take the following safety precautions when using washer fluid:

Brake/clutch fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reser ...

Parking brake
Checking the parking brake Check the stroke of the parking brake by counting the number of “clicks’’ heard while fully applying it from the released position. Also, the parking brake alone sh ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Seat Belt Buckle Switch (BS) Description and operation
Description • The SRSCM should detect the condition of seat belt buckles (BS) of the driver and passenger seats. • The SRSCM provides two pins to each side, in order to enter the condition of seat belt buckles (BS) of the d ...

Hyundai Kona (OS) 2018-2026 Service Manual: Water Temperature Control Assembly Repair procedures
Removal and Installation 1. Disconnect the battery "-" terminal. 2. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover") 3. Remove the engine room unde ...

© 2018-2026 www.hkona.com