Hyundai Kona: Tires and wheels / Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels aligned again. However, if you notice unusual tire wear or your vehicle pulling one way or the other, the alignment may need to be reset.
If you notice your vehicle vibrating when driving on a smooth road, your wheels may need to be rebalanced.
NOTICE
Incorrect wheel weights can damage your vehicle’s aluminum wheels. Use only approved wheel weights.
Tire rotation
To equalize tread wear, HYUNDAI recommends that the tires be rotated every 12,000
km (7,500 miles) or sooner if irregular wear develops. During rotation, check the
tires for correct balance.
When ro ...
Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band
across the tread. This shows there is less than 1.6 mm (1/16 in.) of tread left
on the tire. Replace the tire when thi ...
Other information:
Hyundai Kona (OS) 2018-2025 Service Manual: Fuel Pressure Sensor (FPS) Description and operation
Description
The fuel pressure sensor (FPS) is installed on the top of the low pressure fuel
pump and measures the pressure in the low pressure fuel line.Based on the fuel
pressure measured by the FPS and the amount of fuel consumed, the fuel pump
control module (FPCM) determ ...
Hyundai Kona (OS) 2018-2025 Service Manual: Starter Description and operation
Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery cable.
When the ignition key is turned to the start position, current f ...
