Hyundai Kona: Exterior care / Aluminum wheel maintenance
The aluminum wheels are coated with a clear protective finish.
NOTICE
- Do not use any abrasive cleaner, polishing compound, solvent, or wire brushes on aluminum wheels.
- Clean the wheel when it has cooled.
- Use only a mild soap or neutral detergent, and rinse thoroughly with water. Also, be sure to clean the wheels after driving on salted roads.
- Do not wash the wheels with highspeed car wash brushes.
- Do not use any cleanser containing acid or alkaline detergents.
Underbody maintenance
Corrosive materials used for ice and snow removal and dust control may collect
on the underbody. If these materials are not removed, accelerated rusting can occur
on underbody parts such as the fuel ...
Corrosion protection
Protecting your vehicle from corrosion
By using the most advanced design and construction practices to combat corrosion,
we produces vehicles of the highest quality. However, this is only part of the ...
Other information:
Hyundai Kona (OS) 2018-2025 Service Manual: Electric WGT Control Actuator Specifications
Specification
[EWGA Position Sensor]
Position
Output Voltage [V]
Operating Angle [°]
Range of Rod [mm], reference
Mechanical Close end stop Position (MCP)
4.8
0
0
...
Hyundai Kona (OS) 2018-2025 Service Manual: Delivery Pipe Repair procedures
Removal
•
In case of removing the high pressure fuel pump, high pressure
fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pressure ...
