Hyundai Kona: Roof Trim / Assist Handle Repair procedures

Replacement
  
Put on gloves to prevent hand injuries.
  
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
Take care not to bend or scratch the trim and panels.
1.
After lifting up the assist handle caps and loosening the mounting screws, remove the assist handle (A).

2.
To install, reverse removal procedure.
Assist Handle Components and components location
Component Location 1. Assist handle ...

Roof Trim Assembly Components and components location
Component Location 1. Roof Trim Assembly ...

Other information:

Hyundai Kona (OS) 2018-2022 Service Manual: Inhibitor Switch Specifications
Specifications Type: Combination of output signals from 4 terminals Item Specifications Output type Combination of output signals Power supply (V) 12 Signal Code Table ...

Hyundai Kona (OS) 2018-2022 Service Manual: Smart Key Repair procedures
Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model and then do "Smart Key Code ...

© 2018-2022 www.hkona.com