Hyundai Kona: Engine coolant / Changing the engine coolant

We recommend that coolant be changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this chapter.

NOTICE

To prevent damage to engine parts, put a thick towel around the radiator cap and/or radiator cap before refilling the coolant to prevent the coolant from overflowing into engine parts, such as the alternator. NOTICE

Checking the engine coolant level
Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses. The coolant level should be filled between MAX and MIN (or F (Full) and L ...

Brake/clutch fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reser ...

Other information:

Hyundai Kona (OS) 2018-2023 Service Manual: GPF (Gasoline Particulate Filter) Repair procedures
GPF Regeneration This procedures is to forcibly regenerate the GPF with scan tool when the GPF doesn't have been regenerated during driving. For example, if the vehicle has repeated "Low speed driving" or "Short distance driving", the GPF regeneration ...

Hyundai Kona (OS) 2018-2023 Service Manual: Temperature Control Actuator Description and operation
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the tempe ...

© 2018-2023 www.hkona.com