Hyundai Kona: Timing System / Idler Repair procedures

Hyundai Kona (OS) 2018-2020 Service Manual / Engine Mechanical System / Timing System / Idler Repair procedures

Removal and Installation

1.	Remove the drive belt. (Refer to Timing System - "Dreve Belt")

Remove the idler (A).

Tightening torque :

42.2 - 53.9 N.m (4.3 - 5.5 kgf.m, 31.1 - 39.8 lb-ft)

•	Check the idler for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.

3.	Install in the reverse order of removal.

Idler Components and components location

Components 1. Idler ...

Drive Belt Tensioner Components and components location

Components 1. Alternator bracket (Drive belt tensioner) ...

Other information:

Hyundai Kona (OS) 2018-2020 Owners Manual: Windshield washers
In the OFF (O) position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. The spray and wiper operation will continue until you release the lever. If the washer does not work, you may need to add washer fluid to the washer fluid reservoir. ...

Hyundai Kona (OS) 2018-2020 Service Manual: Exhaust Gas Temperature Sensor (EGTS) Schematic diagrams
Circuit Diagram EGTS #1 Harness Connector EGTS #2 Harness Connector ...