Hyundai Kona: Tire Pressure Monitoring System (TPMS) (Type B) / Check tire pressure

Hyundai Kona (OS) 2018-2021 Owners Manual / What to do in an emergency / Tire Pressure Monitoring System (TPMS) (Type B) / Check tire pressure

You can check the tire pressure in the Assist mode on the cluster. Refer to the "LCD Display Modes" in chapter 3.
Tire pressure is displayed after a few minutes of driving after initial engine start up.
If tire pressure is not displayed when the vehicle is stopped, "Drive to display" message will appear. After driving, check the tire pressure.
The displayed tire pressure values may differ from those measured with a tire pressure gauge.
You can change the tire pressure unit in the User Settings mode on the instrument cluster.
- psi, kpa, bar (Refer to "LCD Modes" in chapter 3).

Tire Pressure Monitoring System (TPMS) (Type B)

(1) Low Tire Pressure Telltale/ TPMS Malfunction Indicator (2) Low tire pressure position telltale and tire pressure telltale (Shown on the LCD display) ...

Tire pressure monitoring system

WARNING Over-inflation or under-inflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure that may cause loss of vehicle control resulting in an accident. Ea ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Ignition Coil Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the battery negative (-) terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connector (A). ...

Hyundai Kona (OS) 2018-2021 Owners Manual: Rear view monitor
The Rear view monitor will activate when the engine is running and the shift lever is in the R (Reverse) position. This is a supplemental system that shows behind the vehicle through the mirror or navigation display while backing-up. WARNING The Rear view monitor is not a safety device. It only s ...