Hyundai Kona: Airbag Module / Curtain Airbag (CAB) Module Description and operation

Hyundai Kona (OS) 2018-2021 Service Manual / Restraint / Airbag Module / Curtain Airbag (CAB) Module Description and operation

Description
Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain airbag by using side impact sensor (SIS) signal.
  
Never attempt to measure the circuit resistance of the airbag module even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.
Curtain Airbag (CAB) Module Components and components location
Components 1. Curtain Air Bag (CAB) ...

Curtain Airbag (CAB) Module Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the roof trim. ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1]. 4. Measure resistance between the HO2 ...

Hyundai Kona (OS) 2018-2021 Service Manual: AGM Battery Specifications
Specifications ▷AGM60L-DIN Item Specification Model type AGM60L-DIN Capacity [20HR/5HR] (AH) 60/48 Cold Cranking Amperage (A) 640 (SAE/EN) Reserve Capa ...

© 2018-2021 www.hkona.com