Hyundai Kona: FCA warning message and system control / Emergency braking (Second warning)

This warning message appears on the LCD display with a warning chime.

Additionally, some vehicle system intervention occurs by the engine management system to help decelerate the vehicle.

- The FCA system limitedly controls the brakes to preemptively mitigate impact in a collision. The brake control is maximized just before a collision.

Collision Warning (First warning)
This warning message appears on the LCD display with a warning chime. Additionally, some vehicle system intervention occurs by the engine management system to help decelerate the vehicle. - Your ve ...

Brake operation
In an urgent situation, the braking system enters into the ready status for prompt reaction against the driver's depressing the brake pedal. The FCA provides additional braking power for optimum ...

Other information:

Hyundai Kona (OS) 2018-2020 Owners Manual: To set Cruise Control speed
1. Press the (CRUISE) button on the steering wheel to turn the system on. The (CRUISE) indicator will illuminate. 2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph). Information - Manual transmission For manual transmission vehicles, you should depress the brake pedal at ...

Hyundai Kona (OS) 2018-2020 Service Manual: Accelerator Pedal Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). 3. Remove the installation nuts (A) and then re ...

© 2018-2020 www.hkona.com