Hyundai Kona: Windows / Power windows

(1) Driver’s door power window switch

(2) Front passenger’s door power window switch

(3) Rear door (left) power window switch*

(4) Rear door (right) power window switch*

(5) Window opening and closing

(6) Automatic power window*

(7) Power window lock switch

The ignition switch must be in the ON position to be able to raise or lower the windows. Each door has a Power Window switch to control that door's window. The driver has a Power Window Lock switch which can block the operation of passenger windows. The power windows will operate for approximately 30 seconds after the ignition switch is placed in the ACC or OFF position. However, if the front doors are opened, the Power Windows cannot be operated even within the 30 second period.

WARNING

To avoid serious injury or death, do not extend your head, arms or body outside the windows while driving.

Information

Windows
...

Window opening and closing
To open: Press the window switch down to the first detent position (5). Release the switch when you want the window to stop. To close: Pull the window switch up to the first detent position (5). Rel ...

Other information:

Hyundai Kona (OS) 2018-2019 Service Manual: Exhaust Gas Temperature Sensor (EGTS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the connector of exhaust gas temperature sensors #1/#2. 3. Measure resistance between sensor signal terminal and ground terminal. 4. ...

Hyundai Kona (OS) 2018-2019 Owners Manual: Air intake control (7)
This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, press the control button. Recirculated air position With the recirculated air position selected, air from the passenger compartment will be drawn through the heating system ...

© 2018-2019 www.hkona.com