Hyundai Kona: Power windows / Auto up/down window

Auto down window

Pressing the power window switch momentarily to the second detent position (6) completely lowers the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch.

Auto up/down window

Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or lifts the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch.

Window opening and closing
To open: Press the window switch down to the first detent position (5). Release the switch when you want the window to stop. To close: Pull the window switch up to the first detent position (5). Rel ...

To reset the power windows
If the power windows do not operate normally, the automatic power window system must be reset as follows: 1. Place the ignition switch to the ON position. 2. Close the window and continue pulling up ...

Other information:

Hyundai Kona (OS) 2018-2019 Service Manual: Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. Condition Output Voltage (V) ...

Hyundai Kona (OS) 2018-2019 Service Manual: A/C Pressure Transducer Description and operation
Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the opera ...

© 2018-2019 www.hkona.com